Providing the solid waste handling equipment sector with a better solution
TB4527 Series Balers
Printable specifications sheet (PDF)
This Equipment is CSA Approved and Conforms to all Current ANSI Z245.2 Safety Standards
In order to provide the most currently engineered and designed equipment, we reserve the right to change specifications without notice. This brochure is intended to provide information only, and should not be used in an arbitrary manner to judge equipment for any particular purpose.
Standard Features
- CSA Approved Design
- Heavy duty oil - tight pushbutton controls
- Key lockable start pushbutton
- Automatic single-cycle operation
- PLC controlled system
- Full-container light
Optional Equipment
- Deep Chamber (36")
- Full bale light
- Hydraulic bale dump
- R.H. hinged bale door
- Pull down feed gate
- Rear wire guides
Mechanical Specifications
| TB4527 | TB4527XHD | |
|---|---|---|
| Bale Size | 42" x 27" x 27" | 45" x 27" x 27" |
| Bale Weight | up to 350 lbs. | up to 800 lbs. |
| Cylinder Size | 1 x 4" | 1 x 6" |
| Full Penetration Cylinder | NO | YES |
| Baling Force Normal | 25,132 lbs | 56,500 lbs |
| Baling Force Maximum | 27,632 lbs | 62,150 lbs |
| System Pressure Normal | 2,000 psi | 2,000 psi |
| System Pressure Maximum | 2,200 psi | 2,200 psi |
| Cycle Time | 30 seconds | 65 seconds |
| Pump Capacity | 3 gpm | 5 gpm |
| Motor Size | 3 hp | 5 hp |
| Platen Pressure Normal | 21.1 psi | 47.6 psi |
| Platen Pressure Maximum | 23.3 psi | 52.3 psi |
| Oil Tank Capacity | 8 gal | 20 gal |
| Bale Ejection | chain free | chain style |
| Shipping Weight | 1,400 lbs | 3,600 lbs |
Electrical Specifications
| Control System | 110 volt 60 cycle powered by step-down transformer |
| Control Panel | Fully wired. Keyed start button, emergency stop, full lights, reset button |
| Power | 208/230/575 volt, 3 phase 60 cycle |
Dimensions
| A | B | C | D | E | F | |
|---|---|---|---|---|---|---|
| 4527 | 87" | 78" | 60" | 31" | 27" | 18" |
| 4527XHD | 90" | N/A | 64" | 34" | 29" | 18" |